Manufacturing · Operational Technology · Enterprise IT

OT/IT Convergence

Your shop floor and your back office should run on the same facts. We connect operational technology to enterprise IT and ERP, securely and reliably, without exposing production to risk.

What We Deliver

Bridge the Shop Floor and the Enterprise, Safely

For manufacturers and distributors, the most valuable data is created on the production line: machine state, throughput, quality, and downtime. Yet it rarely reaches the systems that plan and cost the business. SorceTek connects Operational Technology (PLCs, SCADA, industrial controllers, and shop-floor equipment) to enterprise IT and your ERP, so real production data flows into planning, inventory, and finance. We do it the right way: segmenting and securing the OT network, designing resilient machine-to-ERP data flows, and protecting uptime, because on a factory floor an outage stops shipments. Texas-based, serving SMBs nationwide.

OT/IT Network Segmentation

We design segmented, firewalled network zones between production and enterprise systems, so connectivity never becomes an attack path into the shop floor.

Machine-to-ERP Data Flow

Production counts, machine status, and quality data flow into SAP and ERP. Planning, inventory, and costing then reflect what is actually happening on the line.

Security & Reliability

Hardened gateways, redundancy, and continuous monitoring hold the OT/IT bridge open, while the same controls keep production sealed off from what should not reach it.

What's Included

Everything in an OT/IT Engagement

A structured program that connects production to the enterprise while keeping the OT environment protected.

  • OT and IT asset discovery and network mapping
  • OT/IT network segmentation and firewall zone design
  • Industrial protocol assessment (OPC UA, Modbus, MQTT, and more)
  • Secure gateway and edge-device architecture
  • Machine, PLC, and SCADA data acquisition
  • Machine-to-ERP data flows into SAP and ERP
  • Production, throughput, and downtime data surfaced to planning
  • OT security hardening and monitoring
  • Redundancy and reliability design for critical links
  • Change control aligned to production schedules
  • Documentation of the converged architecture
  • Handover to managed monitoring and support
Client Reviews

What Clients Say on Google

Published reviews from our Google Business Profile, quoted as written.

5 out of 5
When our system went down late on a Friday, James Darroch and his team at SorceTek Technology Group stepped up in a way you don't see often. I reached out expecting to hear back the following week. Instead, James called from the golf course (literally) and had his team with Tyler and Christian Laney working on the issue straight away... If you're looking for an IT partner who takes ownership and actually shows up when it matters, I highly recommend SorceTek Technology Group.
Robin Kim Google review · 11 months ago
5 out of 5
The SorceTek Group provides exceptional service. Tyler and his team go above and beyond, with such personable, yet professional service, quick response times and positive attitudes. He is able to resolve issues timely...
Mindy Herendon Google review · 8 years ago
5 out of 5
Tyler and his team at SorceTek have been fantastic. I have known Tyler through previous business acquaintances for several years. Myself and my team wish that we would have chosen SorceTek several years ago. With their knowledge and...
Bart Christenson Google review · 5 years ago
5 out of 5
He has patiently and diligently worked with all of our staff to ensure their upgrades and security is up to date and continues that way.
Tiffany Harriman Google review · 7 years ago
Our Process

How We Deliver OT/IT Convergence

1

Discovery & Asset Mapping

We map your OT and IT assets, industrial protocols, network paths, and the production data that matters most to the business.

2

Segmentation Design

We design segmented, firewalled zones between production and enterprise networks, following a defense-in-depth model for the shop floor.

3

Data Flow Architecture

Secure gateways and edge devices collect machine data and route it to SAP and ERP through a resilient, monitored data flow.

4

Pilot & Validate

We pilot on a line or cell, confirm the data is accurate end to end, and validate that segmentation and security controls hold.

5

Rollout & Hardening

We extend the architecture across the plant, harden the OT environment, and build in redundancy for the connections that matter.

6

Monitoring & Handover

We document the converged architecture and hand over to ongoing monitoring and managed support, so the bridge stays healthy.

Want this scoped against your environment?

A free assessment maps what you already run, flags the gaps, and comes back with a written plan and a fixed monthly figure where the work is managed.

FAQ

Common Questions About OT/IT Convergence

What is OT/IT convergence?
OT (Operational Technology) is the hardware and software that runs your shop floor: PLCs, SCADA systems, industrial controllers, and machines. IT is your enterprise systems, including ERP. OT/IT convergence connects the two so production data flows into business systems and the two domains are managed in a coordinated, secure way, rather than as isolated islands.
Will connecting OT to IT expose our shop floor to cyber risk?
Done carelessly, yes. That is why segmentation comes first. We design firewalled network zones between production and enterprise systems, use secure gateways for data flow, and harden and monitor the OT environment. The goal is to gain the data without turning connectivity into an attack path into production.
Which industrial protocols do you support?
We work with common industrial and IIoT protocols including OPC UA, Modbus, MQTT, and vendor-specific machine interfaces, bridging them to the APIs and messaging your ERP and enterprise systems understand. We assess your equipment during discovery and select the right acquisition method for each source.
What production data can flow into our ERP?
Typical flows include production counts and yields, machine status and downtime, quality and scrap data, and consumption against work orders. Surfacing this in SAP or your ERP means planning, inventory, and costing reflect what is actually happening on the line, not yesterday's manual entries.
How do you avoid disrupting production during the work?
We pilot on a single line or cell first, schedule changes around production windows, and follow strict change control. The architecture is validated before rollout, and critical connections are built with redundancy, so adding visibility never comes at the cost of uptime.
Ready to Get Started?

Connect Your Shop Floor to the Enterprise

Start with a free OT/IT assessment. We will map your production data, flag the security gaps, and propose a secure path to a connected plant.

No obligation. Response within 4 business hours.

Professional Services · North America

OT/IT Across North America

We deliver ot/it from our Frisco, TX office across North America. Pick your city for the local detail: districts covered, county, and how on-site support works there.